We are one of the leading Manufacturers in Bawal, Exporter & Suppliers  of Precision Laboratory Water Bath from Delhi based, We deals in superior quality of Precision Laboratory Water Bath. Innova Corporate (India) is a prominent manufacturer and exporter of Precision Laboratory Water Bath. Quality is checked at each stage and the final products are tested against stringent quality standards ensuring timely delivery in the process.

  • Multitudes of Bath size for Varities of application expectation
  • Small to large capacity Bath, heater element top cover & other wetted Parts with 304 grade S. Steel for years of life & easy of daily clean.
  • S. Steel perforated 304 grade diffuser plate.
  • Drain Plug made of brass duly Nickled on the back of the bath.
  • Full feature with Digital Temp. Controller / Indicator & Microprocessor Based PID Temp. Controller Cum Indicator (On customer demand)
  • Stability up to 0.5°C or better
  • Better mineral / glasswool insulation to keep the surface comfortable to work
  • Low water cut off system / water level with Indicator (Provided on customer request)
  • Best quality Bi-Metallic capillary Thermostat to give accurate results

 

Applications :

Sample Maintaining Testing Calibration & Process Control

 Specifications :

Model
1.04
Single
Walled 
1.05 A 
Double Walled
6 Holes
1.05 B 
12 Holes
1.06 A
2 Racks
D. Walled
1.06 B
4 Racks
D. Walled
1.06 C
6 Racks
D. Walled
1.06 D
8 Racks
D. Walled
Capacity "L"
8 Ltrs.
15 Ltrs.
8 Ltrs.
15 Ltrs.
14 Ltrs.
18 Ltrs.
25 Ltrs.
30 Ltrs.
Heater Wattage "W"
Kettle
Element
1.5/ 2.0KW
1.5 KW
1.5 KW
1.5 KW
2.0 KW
2.0 KW
2.0 KW
Shelves
-
-
-
1
1
1
1
Dimensions (Internal mm)
300 x 250 x 100
425 x 325 x 100
300 x 250 x 100
425 x 325 x 100
300 x 250 x 175
325 x 300 x 175
450 x 300 x 175
600 x 300 x 175
Bath Opening
6 Holes of 3" Dia
12 Holes of 3" Dia
6 Holes of 3" Dia
12 Holes of 3" Dia
SS Plain Lid
SS Plain Lid
SS Plain Lid
SS Plain Lid
 
* Dimensions are expressed in (Width x Depth x Height)

 

Technical Parameters : 

Control Panel : Temp. Controller, With Mains & Load Indicator, Mains Switch
Temperature Range : Ambient to 95 °C
Temperature Stability :

+-0.5°C or better/ +- 0.2°C or better Incase of Digital Temp. Controller or Microprocessor Based PID Temp. Controller

Housing Material :

CRC / Mild Steel Sheet with Powder Coated

Optional :

Outer body of S.S. 304 grade also can be made on customer demand

Interior Tank :

S. Steel 304 grade water Tank duly sealed leak proof

Insulation :

Glasswool/ Mineral Wool

Power Consumption : 220/230V, AC Supply +- 10% 50Hz
Duty Cycle : Continuous ( Do check water level as per test requirement )

For any other requirements of Laboratory Instruments & Products, please mail us at vinod@innovacorporate.com Or amavinod@bol.net.in or call us on our Mobile No. +91-9312871070 Or 9911130697.