The  polymers are water soluble, synthetic flocculants of medium molecular weight based on Polyacrylamide. The polymer flocculants are also copolymers of acrylamide with acrylie acid and acrylic esters.

The polymers can either be used alone or in combination with inorganic primary coagulants like aluminium sulphate, lime, ferrous sulphate etc. It is therefore important to control the consumption of water, use water more efficiently and most importantly to treat & recycle the water used in industrial processes.

APPLICATION OF POLYMER

Paper & Pulp                                      : as retention aid and recovery of fines from save all

Waste Water Treatment Plants   : for better sedimentation, filtration and clarification 

 

Properties
Major Contents	Polyacrylamide
Molecular Weight	Medium
Ionic Value	Non-Ionic
Shape	White granules
Bulk Density	0.6 – 0.9 kg / m3
Suggested Dilution	0.05 - 0.1 %
Effective pH range	6 – 13
Aqueous Solution pH (0.1% Solution in Distilled Water)	6.5 – 8.5

 

 

 

 

 

 

 

 

BENEFITS OF POLYMER

 Small dosage

 Retention time is low

 Forms tough, dense & compact flocs

 Rapid & complete coagulation

 Sludge volume compaction

 Fast settling and more filterable flocs

 Energy consumption is less

 Applicable under slightly acidic to neutral pH conditions

 Treated water can be easily discharged or reused for other applications 

DOSAGE & FEEDING

Plant Feed Concentration:

For plant use we recommend 0.05% concentration of the product.

Polymer Feed System:

Successful performance of the product depends on the properly designed automated feed system. The dosing system should consist of tank of sufficient capacity equipped with agitator. For feeding Polymer granules, hopper with lid is necessary to ensure controlled addition of product and avoid absorption of moisture. It is recommended to dose the solution through metering pump.

Feed Point:

It is added in high turbulence areas in the plant to ensure high mixing energy and better contact of polymer with the impurities in the water.

PACKING, STORAGE, LIFE & SAFETY

25 KGs / 50 KGs HDPE double line bags. Under normal condition of storage it is stable for one year.

It is hygroscopic in nature & absorbs moisture from atmosphere under damp and humid conditions. Hence bags/container should be closed tightly and stored in cool, dark and dry place at ambient temperature.

It is non-hazardous, non-inflammable and non-toxic solid polymer. However caution must be exercised to avoid dusting while handling by using mask.