Alpha cellulose is white to off white, odorless, tasteless, free from organic & inorganic contaminations. It is mysterious in water, dilute acids, and in mostly all organic solvents. Practically insoluble in Sodium Hydroxide solution.

Alpha-cellulose

Comparison Table for Welding Electrode - ICI001, ICI002, ICI003, ICI004, ICI005,  ICI006, ICI007
Enzyme Production - ICI 008

Filter Aid - Cellulose Powder (Filter-Aid)

Comparison Table

Parameters ICI-001 ICI-002 ICI-003 ICI-004 ICI-005 ICI-006 ICI-007
Appearance White or almost white powder White or almost white powder White or almost white powder White or almost white powder White or almost white powder White or almost white powder Granular in Haryana, White, Odourless
Identification Comply Comply Comply - - - -
Cellulose Content % by Mass, Min 99.5 99.5 99.5 80 80 90 -
Alpha Cellulose in Haryana,% by Mass, Min Approx. 95 Approx. 95 Approx. 95 - - - -
Whiteness(Absolute Value, 461nm), % 85± 5 85± 5 85± 5 85± 5 85± 5 85± 5 85± 5
pH 6-8 6-8 6-8 5-7 7-8 7-8 6-8
Moisture, % by Mass, Max 7 7 7 10 7 7 7
Total Ash, % Max 0.5 0.5 0.3 0.5 0.5 0.5 1.0
Ether Extract, % Max 3 3 3 3 3 3 -
Bulk Density, g/litre 400 - 550 250 - 350 200 - 300 450-650 450-650 450-650 400-700
Starch and Dextrins Absent Absent Absent - - - -
Passing 100 BSS, Mesh size, % NLT 95 95 95 95 95 95 70
Packing,Kgs 40 25 25 40 40 40 40
PROBABLE APPLICATION AREA
Welding Electrode               

E-6010

Ö Ö  Ö X X X X
           E-6011 Ö Ö Ö X X X X
           E-6012 Ö Ö Ö Ö Ö Ö Ö
           E-6013 Ö Ö Ö Ö Ö Ö Ö
           E-6020 Ö Ö Ö Ö Ö Ö Ö
           E-7024 Ö Ö Ö Ö Ö Ö Ö
 

 Shelf life/Storage condition

It is considered to be stable product and is packaged in a sealed manner. The product has no specific requirement for storage, and there is no expiration date. However, it may absorb moisture if exposed to the atmosphere with a relative humidity higher than 65%.

  Packaging

It is packaged in net 40 Kg in HDPE woven sack bag with inside two HM liners. Packaging can also be done in Fiber drums if required.

Cellulose Powder in Welding Electrode

Application: -In casting material of welding electrodes Cellulose Powder is used in considerable quantities. High cellulose content ensures correct burning of electrodes. Cellulose Powder is a inert material and it leaves practically nothing after incineration and provides reduced atmosphere due to decomposition of organic material present in Cellulose Powder thus it prevents oxidation. Resultant welding will be free from pinholes, cracks etc. Cellulose Powder having wonderful free flowness helps in smooth extrusion of electrode without any cracks on its surface. Cellulose Powder in Haryana, which has now become a synonymous name in Electrode world, is a must for all of grades of quality electrodes.

Quantum to be used: The amount to be used in Welding Rod Industries depends on the quality of Welding electrodes and other ingredients in the flux. Percentage of Cellulose Powder in Electrode Flux Reported is given below.

Grade Type of Electrode % Cellulose Powder (Reported)
ICI-002 E-6010 & E-6011 25-40
ICI-001, ICI-002, ICI-005, ICI-006 E-6012 & E-6013 2-5
ICI-002, ICI-006 E-6020 & E-7024 1-5

Cellulose Powder in Enzyme Production

Enzyme Cellulose is being used in various industries for different applications. Enzyme Cellulose has demand in textile industry for fabric finishing and fabric softening, in detergent industry for colour brightening, softening and soil removal, in wine industry for clarification of wine, in protein industry for extraction of protein and in some more industries.

We offer Cellulose Powder as a substrate to utilize in Enzyme Cellulose production. Our cellulose powder is manufactured from special quality wood pulp. It is processed very carefully to remove amorphous part of cellulose and crystalline part of cellulose is retained. It is free from any harmful foreign material and is very good substrate for Trichodermaspecies. Our cellulose powder is already been used by some industries for making Enzyme Cellulose.

SPECIFICATIONS OF ICI 008 

      Parameters Specifications
 Appearance  Fine/Granular in Haryana, White, Odourless
 Identification  Comply
 Cellulose Content % by Mass, Min  99
 Whiteness(Absolute Value, 461nm), %  85 ± 5
 pH  5-7
 Moisture % by Mass, Max  7
 Total Ash, % Max  1.0
 Bulk Density, g/litre  300 - 350
 Starch and Dextrins  Absent
 Passing 100 BSS, Mesh size, % NLT  95

Cellulose Powder (Filter-Aid)

Cellulose Powder (Filter-Aid) for filtration :-

VERSATILE, BIODEGRADABLE NATURAL ORGANIC FIBRE:-

Innova Corporate (India) Cellulose Powder (Filter-Aid) filter aid is Cellulose product. Virgin stock pulps are being used for Cellulose Powder (Filter-Aid).

What is a filter aid?

A filter aid is a permeable layer from which impurities can be trapped, thus prevents premature clogging of the support cloth(Filter cloth, Wire mesh, Ceramic filters etc.)

Why Cellulose Powder (Filter-Aid) should be used?

Cellulose Powder (Filter-Aid) is fibrous structure, rough surface, large porosity, higher flow rate, less pressure drop and longer cycle time and is a food grade.

FILTRATION APPLICATIONS

Cellulose Powder (Filter-Aid) is used both in beverage and industrial filtration and also for high quality product filtrations. It is an excellent filter aid because it precoats quickly, provides good cake stability, cleans quickly, prevents bleed-through and can be burned to reduce disposal costs.

Cellulose Powder (Filter-Aid) is good depositing media during filtration of galvanic baths and organic solutions.Many substances such as precious metals can be recovered by incinerating the filter cake. Due to fine fibrous structure and specific surface of the Cellulose Powder (Filter-Aid), good filtration is obtained.

1. Condensate And Boiler Feed Filtration

Used To Remove Insoluble Metallic Impurities And Oil.

2. Rear Earth And Metallic Ore Filtration

Filter Cake Can Be Burned To Recover Product.

3. Brine Filtration In Chloro-Alkali Industries.

Used To Remove Solid Impurities Less Than 0.3 Micron.

4. Beverage Filtrations

Prevents Filter Aid Bleed-Through.

5. Emulsion Filter

Absorbs Oil And Breaks Emulsions To Prevent Contamination Of Screens.

6. Petroleum Filtration

Removes Emulsified Water.

7. Plating Filtrations

Removes Solids Without Threat Of Contaminating Filtrate With Soluble Silica.

8. Cooking Oil Filtration

Removes Fine Impurities, Thus Increases Clarity Of Oil.

9. Separation Of Catalyst

Some of the processes use catalyst to optimize reaction performance. It is usually added in fine grades (Large reactive surface). Due to fine separation of the catalyst from the corresponding reaction mixture is not possible, which we can get recycled by filtration with Precoat Cellulose Powder (Filter-Aid) fibre.

10. ALKALINE FILTRATION

Used when soluble silica threatens the filtrate.

Cellulose Powder (Filter-Aid) for Filtration

Cellulose Powder (Filter-Aid) for brine polishing filter

Alpha cellulose, as an effective filter media has been well established and accepted for brine filtration with the advent of membrane cell technology. This filter aid cellulose has versatile advantages, is technically economical, and is eco-friendly too, since it is biodegradable. Polishing of brine is necessary to remove the solid impurities even less than 0.3 micron with the help of the filter aid coating on filters. Consumption (T/T of Sodium Hydroxide) of alpha cellulose is reported to vary from 0.27 to more than 0.4 depending upon the grade vis-à-vis the pressure drop requirement. Filtration cycle time varies accordingly in the range of 27 hours to 62.5 hours that also depends upon the flow rate.

There are a Dozens of advantages over Conventional Filter aid, as Follows.

  • Non-toxic: Cellulose Powder (Filter-Aid) Fiber is a 100% pure cellulose product and is absolutely non-toxic.

  • Biodegradable: Cellulose Powder (Filter-Aid) Fiber is powdered cellulose, manufactured from virgin pulp stock. Therefore, as a natural product, Cellulose Powder (Filter-Aid) Fiber is produced from a renewable source. Once Cellulose Powder (Filter-Aid) Fiber leaves the filter, it is completely biodegradable. When backwashes onto the lawn, Cellulose Powder (Filter-Aid) Fiber will mulch much like grass clippings. Once dried, incineration is another viable option.

  • Lightweight Product: Cellulose Powder (Filter-Aid) Fiber is significantly lighter in weight than traditional Diatomaceous earth (DE) material (approximately half the weight of DE). Because you use only 1/3-1/2 as much Cellulose Powder (Filter-Aid) Fiber to do the same job as DE, and experience 2-6 times longer filter runs, the quantity of Cellulose Powder (Filter-Aid) Fiber to handle and dispose is 1/10 or less the equivalent amount of DE.

  • Non-abrasive: As a soft, pure, cellulose product, Cellulose Powder (Filter-Aid) Fiber is easy on the filtration and Equipment in Haryana, especially backwash valves, pump seals, and impellers, heaters, and the piping system.

  • Improved Filtration: With Cellulose Powder (Filter-Aid) Fiber, you will experience 100% filtration. Being a fibrous material, Cellulose Powder (Filter-Aid) Fiber will often "Weave" over small ruptures in filter grids. All dirty pool water is forced to pass through a path of Cellulose Powder (Filter-Aid) Fiber, removing particles down to 2 microns. With no dirty water by-pass, your water will be polished to a new level of clarity never before experienced with DE. This 100% filtration feature is especially important of older, worn filter systems and grids.

  • Save Water and Chemicals: With longer filtering cycles, you will not be backwashing large volumes of chemically treated (and heated) water. There will also be less water required for backwashing.

  • Longer Filter Cycles: Nearly every pool filter when converted from DE to Cellulose Powder (Filter-Aid) Fiber experiences much longer filter cycles. Cellulose Powder (Filter-Aid) Fiber forms a filter coating or cake with far more dirt holding capacity than normal pool DE which results in longer filtering cycles.

  • Save Time and Labor: Because Cellulose Powder (Filter-Aid) Fiber is only half as dense as DE, when backwashing your filter, all of the Cellulose Powder (Filter-Aid) Fiber will easily wash away from the grids. Gone is the problem of caking, filter teardowns, and labor intensive cleaning. You will backwash and recharge with Cellulose Powder (Filter-Aid) Fiber in less than half the time.

  • Removes Oils: Cellulose Powder (Filter-Aid) Fiber as a powdered cellulose material has a natural affinity for body and tanning oils found in the water of every pool. When converting an existing system, Cellulose Powder (Filter-Aid) Fiber will "clean up" oils (filter cycles may be initially shorter) and reduce scum lines on your pool.

  • Mixes Easily: Pre-coats rapidly. Cellulose Powder (Filter-Aid) Fiber as a 100% pure cellulose product wets out extremely easily. Uniform slurry is rapidly achieved which form a more uniform coating or "cake" on the filter grids, resulting in a more effective filtration surface area.

  • Filters, Cellulose Powder (Filter-Aid) Fiber: Filter Cellulose Powder (Filter-Aid) Fiber will "top coat" the sand bed, enhancing filtration, and most importantly, Cellulose Powder (Filter-Aid) Fiber will completely backwash from the sand bed.

  • Economical: Cellulose Powder (Filter-Aid) Fiber is economically very competitive even with the lowest DE prices available. Customers have found that Cellulose Powder (Filter-Aid) Fiber is competitive and provides numerous features and benefits of operation that easily make it the filter media of choice over DE or any other media.

  • Inert: Cellulose is an inert against Water, Solvent and Alkalies.

    SPECIFICATION OF FILTER AID CELLULOSE

S.No Test Parameters ARBOCEL KC FLOCK DIACEL INNOVA CORPORATE
    BWW-40 W-50 300 For Leaf Filters For Candle Filters
FILTER AND CELLULOSE
1 PH 5 to 7 6 to 8 5 to 7 5 to 7 5 to 7
2 Average Fibre Length um 200 Not Specified Not Specified 250 35-50
3 Average Fibre Thickness um 20 Not Specified Not Specified 20 20
4 Bulk Density Loose gm/litre 115-145 150-200 50 (App.) 150-250 150-250
5 Ash Content % Max 0.30 0.35 0.30 0.30 0.30
6 Loss on drying, % Max 7.0 7.0 7.0 7.0 7.0
7 Heavy Metals PPM Max. Not Specified Not Specified 20 10 10
8 Organic Impurities Not Specified Not Specified Not Specified Nil Nil
9 Assay (on dried basis) % Max 97.0 Not Specified 97.0 97.0 97.0
10 Sieve Analysis Wt. %     2 (+) 60 Mesh NMT 2.0 (+) 60 Mesh NMT 2.0
  +52 Mesh (300 um) % Max 5 90% Passing through 42 Mesh (i.e.) um.355 35 (+) 100 Mesh NMT 25.0 (+) 100 Mesh NMT 6.0
  +150 Mesh (100 um) % 10 75 (+) 200 Mesh NLT 20.0 (+) 200 Mesh NMT 25.0
  +400 Mesh (032 um) % Min 65     (+) 300 Mesh NMT 25.0