|
GENERAL DESCRIPTION
It is used as Fuel Additive for improvement in dispersions and
atomization. This product has a unique function of bringing down
the problems related to water content, sludge formation,
asphaltenes and wax.
USAGE
It is recommended that treatment products to be fed to the main
fuel tank / day fuel tank.
BENEFITS
It is an excellent slag modifiers, deposit modifiers and are
designed to raise the melting point of the oxides and slag
formations thus resulting in less sticky deposits with a reduced
tendency to adhere to walls and tubes.
SLAG COMPONENTS TYPICALLY INCLUDE :
1) Gamma Sodium Vanadyl vanadate (5Na2O.V2O4V2O5), which has a
melting point of approximately 1070 0F (577 0C).
2) Vanadium Pentoxide (V2O5), having melting point of
approximately 12450F (6740C).
3) Sodium Pyrovanadate (2Na2O V2O5), having melting point of
approximately 1150 0F (621 0C).
4) Sodium Metavanadate (Na2O.V2O5) having a melting point of
approximately 1165 0F (6290C).
DOSAGE
Dosage requirements are dependent on nature of dirt, sludge and
debris matter. Our Technical Services Representative will
provide suitable dosage requirements after thorough surveys of
the system operation.
PACKING
25 kgs. HDPE Carboys.
HANDLING AND STORAGE
These products may cause severe eye and skin irritation. Harmful
if swallowed. Avoid eye and skin contact. Wear eye protection
and rubber gloves at all times when handling these products.
Store in a cool dry place away from strong oxidizing agents.
|
