Innova Corporate (India)

Laboratory Rotary Vacuum Evaporator
In Dharuhera
    Laboratory Rotary Vacuum Evaporator

We are one of the leading Manufacturers in Dharuhera, Exporter & Suppliers  of Ageing Oven from Delhi based, We deals in superior quality of Ageing Oven. Innova Corporate (India) is a prominent manufacturer and exporter of various industrial Ageing Oven. Quality is checked at each stage and the final products are tested against stringent quality standards ensuring timely delivery in the process.

Consist of an evaporating Flask rotated by a non-sparking induction Motor in a heating water Bath. Vacuum Distillation of solvent at high and low Temperature is achieved quickly and 
efficiently by use of speed controller provided. It prevents foaming an vacuum and bumping  of the liquid. Other application include vacuum drying of powders and slides. Low Temper ature Vacuum distillation of heat sensitive compounds. The introduction tube permits continuous  feed of the liquids into evaporating flask and also distillation under Controlled atmosphere. The evaporating Flask, Pear shaped to give a larger surface area for evaporation, is clamped to a glass duct which goes through the drive unit and protrudes 120 mm. Into the condenser. The Condenser is screwed into the drive unit and contains a Teflon inlet feed tube at its upper end.  Condenser is fitted with Standard B-19 joint at top and spherical joint S-35 at the bottom for receiver flasks.

Drive unit with F. H. P. Motor, Speed Regulator, Working on 220Volts A. C. 50 Cycles, Single Phase.


Stand :- Heavy Cast Iron Stand with Steel Rod.
Evaporating Flask 1 Liter ( approx.) with Standard B-29 joint.
Glass Duct  All Glass connector cone with B-29, Connected Evaporating Flask and Protrudes in the condenser. 
With Clip  To hold the Evaporating Flask with Glass Duct. 
Condenser  Double Coil Condenser for water Circulation, fitted with Vacuum Connection and 
standard S-35, ball joint for Receiving Flask with Condenser.
Receiving Flask  1 Liter Capacity with Standard S  35 Ball Joint. 


Ball Joint clamp :- To hold the Receiving Flask with Condenser.


High Vacuum Cock :- Two way stop-for the feeding Tube and Vacuum Release. Feed Tube

 Models Available:

  • 1.53 - Capacity 1 Liter
  • 1.53A - Capacity 2 Liter
  • 1.53B - Capacity 3 Liter
    Optional :-
  • Water Bath Thermostate Controlled or Digital Controlled. As per requirement.
  • Lifting Jack (Manual)
  • Vaccum Grease 

  Applications :

  • For Pharmaceutical Institute, Research Lab use

For any other requirements of Laboratory Instruments & Products, please mail us at vinod@innovacorporate.com Or amavinod@bol.net.in or call us on our Mobile No. +91-9312871070 Or 9911130697.